Hawke Frontier 30 4-24x50 SF IR (Mil Pro 20x)

Hawke Frontier 30 4-24x50 SF IR (Mil Pro 20x)


21 layer Fully Multi-Coated 6 ratio optical system
Side focus control for parallax adjustment
30mm mono-tube chassis for superior strength
Long eye relief for high recoil and magnum calibres
Glass etched reticle with red illumination
6 levels of brightness with off positions in-between
110 MRAD exposed Zero Lock n Stop turrets
Zoom ring with thumb lever and locking ocular

Chassis: 30mm Mono-tube
Optical System: 4-24
Objective: 50mm
Reticle: Mil Pro
Illumination: Red - 6 Levels
Focus/Parallax: Side Focus - 14m / 15yds to Infinity
Field of View: m 100m / ft 100yds: 9.4-1.6m / 28.2-4.8ft
Eye relief: 102mm / 4in
Length: 369mm / 14.5in
Weight: 662g / 23.4oz
Waterproof, Shockproof, Nitrogen purged.
All calibre rated.
Accurate mil spacing on 20 magnification. With half Mil spaced markings extending out to 8 Mil of holdover, the Mil Pro (20) is a versatile reticle that provides aim points no matter how extreme the distance.

All reticle measurements are Mil spaced and offer 1 Mil, 0.5 Mil and 0.25 Mil brackets for range finding. Every second Mil spacing on the lower section is numbered to ensure quick and easy acquisition of target and ease of reference.

Each cross has a see-through gap, allowing an unobstructed view of the target. The thick outer posts are hollowed to ensure they can be seen at all magnifications, without blocking out too much of the view.

Mil Pro 20 models have additional 14 Mil aim points on the center section of the reticle to give even greater precision.

When on 20 magnification, the Mil spaced reticle and 110 MRAD turrets make for easy point of aim adjustment. Every 10 clicks on the turret will measure exactly 1 Mil spacing on the reticle, also known as 1 MRAD.

Additional Information

SKU 013472
Age Restriction N/A


Write Your Own Review

You're reviewing: Hawke Frontier 30 4-24x50 SF IR (Mil Pro 20x)

How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star